Shopping Bag

0 item(s) in cart/ total: $0 view cart

Home > PC > Wingman SD - Converter for SEGA Dramcast, Saturn and PC

Wingman SD - Converter for SEGA Dramcast, Saturn and PC

0 Review(s)

Your Price: $39.99

In Stock.

Part Number:ZPP005B

Quantity

Description
Customer Reviews

200 blocks of DC memory!

Support vibration!

Saturn and Dreamcast are the common memory of a generation, and now we provide more ways to tap the potential of these two consoles. Now you can use Xbox One, Xbox 360, PS4, PS3 controllers on them, and the Switch Pro controller, Xbox Elite controller, Xbox Elite Series 2 controller, Xbox adaptive controller, even Retro-Bit Saturn USB controller are all supportable. from Brook Accessory Gaming

LED

Console LED	Connect to Saturn	Connect to Dreamcast	Switching Method*	Connect to PC
Green LED Permanently on	3D Controller Mode	Gamepad Mode	Select+Triangle	PC Connecting
Red LED Permanently on	Standard Mode	Arcade Stick Mode	Select+Cross

*The example of the switching method used PS3 / PS4 controller. Please refer to the Corresponding Buttons List when using other controllers.

Device LED	Status
Red LED Permanently on	The connector and the device are currently connected.
Red LED Slow Blinking (Once every two seconds)	Wired device is not connected Wireless device is searching for connection…
Red LED Fast Blinking(Seven times per second)	Wireless pairing mode is ON Searching for pairing device…
Red LED Blinking (Five times per second)	Turbo-Remap button is being pressed
Red LED Off	Entering Turbo-Remap Settings

Connecting to the Device

Connect Wingman SD to Saturn / Dreamcast / PC via port. Permanently light of the Console Green LED of Wingman SD indicates that the connection to the console is successful.
Wired Connection:

Connect the Xbox 360 / Xbox One / PS3 / PS4 / Switch wired controller or game pad to Wingman SD through the USB port. Some devices with high power consumption, such as the Switch Pro controller, require an external USB power source for normal use.

Using a X360 wireless controller:

Simply connect the wireless X360 wireless receiver to the Wingman SD through the USB port.

Using Xbox One wireless controller / Xbox One Elite Series 2 controller:

Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman SD and the controller will be ready for use. When connecting, hold the Brook Key on the Wingman SD for 1 second to enter wireless pairing mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Device Red LED of Wingman SD indicates that pairing is in progress.

Using PS3 / PS4 / Switch Pro wireless controller:

After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / Switch Pro wireless controller.

Check whether the Device Red LED of the Wingman SD is permanently on. This indicates that the connection is completed.

Connection Pairing Supplementary Instructions

Holding the Brook Key on the Wingman SD for 1 second will activate wireless connection pairing mode. The Wingman SD will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:

The connection pairing with the wireless controller is successful.
The connection pairing is unsuccessful after 90 seconds.
The Brook Key is held for 1 second.

Wireless connection records between an Xbox One wireless controller (with Bluetooth function) / Xbox One Series 2 and the Wingman SD will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.

If Xbox One Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman SD’s Turbo or Remap settings. As Xbox One Elite Series 1 controller is incapable of turning off profile settings, using Xbox One Elite Series 1 controller might result in Remap function overlapping.

Switch the input mode on Saturn

The default controller input setting of Wingman SD is “3D Control mode”. When using a standard controller, you can switch to ”Standard mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Switch to “3D Control mode”:

Press VIEW + Y, the Console Green LED is permanently on.

Switch to “Standard mode”:

Press VIEW + A, the Console Red LED is permanently on.

Switch the input mode on Dreamcast

The default controller input setting of Wingman SD is “Gamepad mode”. When using a arcade stick, you can switch to ”Arcade Stick mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Switch to “Gamepad mode”:

Press VIEW + Y, the Console Green LED is permanently on.

Switch to “Arcade Stick mode”:

Press VIEW + A, the Console Red LED is permanently on.

Corresponding Buttons List

PS3	PS4	X360	XB1	Switch	PC	Saturn	Dreamcast
D-Pad (U/D/L/R)
Lx / Ly						Analog Stick	Analog Stick
Rx / Ry
?	?	A	A	B	A	A	A
?	?	B	B	A	B	B	B
?	?	X	X	Y	X	X	X
?	?	Y	Y	X	Y	Y	Y
L1	L1	LB	LB	L	LB	Z
R1	R1	RB	RB	R	RB	C
L2	L2	LT	LT	ZL	LT	L	L
R2	R2	RT	RT	ZR	RT	R	R
L3	L3	LSB	LSB	L3	LSB
R3	R3	RSB	RSB	R3	RSB
Start	OPTIONS	START	MENU	+	START	START	START
Select	SHARE	BACK	VIEW	-	BACK
PS Key	PS Key	Xbox Guide Key	Xbox Guide Key	Home	Xbox Guide Key	START	START

Turbo Function Settings

The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Turbo Function Settings

Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

Step 1.Enter setting mode:

Press VIEW + Xbox Guide, the Device Red LED of the Wingman SD will be off.

Step 2.Choosing a FK button: (e.g. Setting A as turbo function)

Hold VIEW, then press A

Step 3.Completing Setting Mode:

Release all buttons, then press MENU to save settings.

Step 4.Exit setting mode:

Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.

Cancelling Turbo Function

Step 1.Enter setting mode:

Press VIEW + Xbox Guide, the Device Red LED of the Wingman SD will be off.

Step 2.Erasing all Turbo function buttons

Press VIEW + MENU

Step 3.Exit setting mode:

Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.

Button Remap Settings

The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Button Remap Settings

Buttons that can be remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

Step 1.Enter setting mode:

Press MENU + Xbox Guide, the Device Red LED of the Wingman SD will be off.

Step 2.Choosing a FK button: (e.g. Setting X as A+B)

Press X

Step 3.Choosing button to be set:

Hold VIEW, then press A + B.

Step 4.Completing setting mode:

Release all buttons, then press MENU to save settings.

Step 5.Exit setting mode:

Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.

Cancelling Button Remap Settings

Step 1.Enter setting mode:

Press MENU + Xbox Guide, the Device Red LED of the Wingman SD will be off

Step 2.Erasing all settings for Button Remap Settings

Press VIEW + MENU.

Step 3.Exit setting mode:

Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.

Notice

*Each Wingman SD can only connect to a single Xbox 360 / Xbox One / PS3 / PS4 / Switch device. Wingman SD supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly.

*Wingman SD do not support headset/microphone function which provides by controller audio jack.